11
3.2 Zone submenu
On this submenu you can see the different zones of your
installation.
You have two types of zones on your programmer:
- Main Zone “Zone1 Thermostat”
You have a full control on this zone (setting temperatures, working
modes, ITCS...)
- Secondary zones “Zone A” and “Zone B”
You have only the control of the working mode and the program on
these two zones.
First of all, for a better understanding after installation you should
rename the zones.
To make this operation press on the button “Zone settings” to show
this screen:
Set point, room, floor
temp temperature
Heating or
cooling indicator
To Next Page
Loading...