Radwin 2000 Series - Elements of the RADWIN Manager Main Window

Elements of the RADWIN Manager Main Window Chapter 6
RADWIN 2000 User Manual Release 2.6.40 6-4
Elements of the RADWIN Manager Main Window
Link details pane
The Link details pane on the left is split into three sections, which are largely self explanatory.
The top section summarizes information about the link:
Tools
Performance
Monitoring Report
On screen and printable
Chapter 9
Active Alarms
1 <Site 1 name>
Shows active alarms for <Site 1
name>
2 <Site 2 name>
Shows active alarms for <Site 1
name>
Recent Events Displays recent events by site
Software Upgrade Upgrade ODU firmware Chapter 15
Spectrum View
Monitor and evaluate spectrum
availability
Chapter 23
Change Band
(Installer only)
Change the link band Chapter 20
Events Log
Clear Events Clear local events log
page 9-20
Save to File Save events log file
Preferences Local preferences dialog
Maintenance
Clear counters Clear TDM counters
Loopbacks Set TDM loopbacks page 9-4
Estimate Eth.
Throughput
Estimate Ethernet throughput by
transmitting full size frames over the
air for 30 sec
page 9-13
Reset
1 <Site 1 name> Reset <Site 1 name> ODU
2 <Site 2 name> Reset <Site 2 name> ODU
Help
RADWIN Manager
Help
View help on online help
Link Budget
Calculator
Calculator opened in default browser Chapter 20
Get Diagnostics
Information
Obtain system information page 9-1
Check for Updates
Check for updates from the RADWIN
Web site
About RADWIN
Manager
Manager build and system information
Table 6-2: RADWIN Manager main menu functionality (Continued)
Menu level
Function Reference
Top +1 +2