Configuration Chapter 7
RADWIN 2000 User Manual Release 2.6.40 7-7
Figure 7-6: Channel frequency options
Selecting one of the frequencies presented returns you to the status of Figure 7-5 with the
appropriate change. If you choose Other..., the following window opens:
Figure 7-7: Choosing an “Other” Operating Channel frequency
The right hand drop-down list (showing the current Operating Channel) allows you to fine-
tune the frequency in increments of ±5MHz within a range of the operating band, which in
this example is 5.740 - 5.835 GHz.
To Next Page
Loading...
