VLAN Tagging for Ethernet Service: Configuration Chapter 8
RADWIN 2000 User Manual Release 2.6.40 8-27
VLAN Tagging - IDU Mode
To set up IDU mode VLAN tagging for Ethernet Service, click the VLAN Configuration...
button in Figure 8-15. The following window is displayed:
Figure 8-18: VLAN tag settings
In Normal mode, you must manually assign each required VLAN ID to a port, whether for
tagging or untagging. Membership mode allows you to allocate blocks of VLAN IDs.
Note
If you are using a new style IDU-E, the SFP row will not appear.
To Next Page
Loading...
