Configuring the GSU Chapter 11
RADWIN 2000 User Manual Release 2.6.40 11-6
Configuring the GSU
Getting Started
To configure the GSU, you log on to it, exactly as in Chapter 4.
The GSU Main Window
Here is the main window for GSU configuration:
Figure 11-6: GSU Main widow at startup
The top five items in the GSU Monitor panel are taken from a satellite. The transmission
Phase may be Normal as shown or Shifted. It purpose, together with the Tx Ratio bar, will
be explained below.
The Status Box
Under normal operating conditions, it will be green as shown, indicating that it is synchro-
nized with a satellite.
If satellite synchronization is lost, then the GSU will function as an independent HSM and the
status box will change color:
To Next Page
Loading...
