The procedure Chapter 21
RADWIN 2000 User Manual Release 2.6.40 21-2
2. Connect the Poe device to AC power.
3. Using a LAN cable, connect the LAN-IN port of the PoE device to the Ethernet port of
the managing computer. The ODU will commence beeping at about once per second,
indicating correct operation.
4. Launch the RADWIN Manager.
5. Log on as Installer.
Figure 21-1: Becoming Installer
6. Enter the default password,
wireless
. After a few moments, the RADWIN Manager
main window appears:
To Next Page
Loading...
