Changing Band for DFS Chapter 21
RADWIN 2000 User Manual Release 2.6.40 21-5
The result is reflected in the RADWIN Manager main window:
Figure 21-6: Main Window after band change - new band circled
Changing Band for DFS
Changing to a DFS band is similar to the foregoing procedure.
As soon as you establish a link using a DFS band, you are offered Configuration only in the
main menu. Installation mode is disabled.
Special Products or Features: Entering a License Key
If you go to the Operations window as Installer (Figure 21-7), you will see a provision for
entering a license key. Should you ever require such a key, the procedure is as follows:
To enter a License key:
1. Log on as Installer (as for the previous procedure).
2. Click the Site:Location tool bar button from the main tool bar.
Note
If you carry out this operation on a link, the band is effective on both sites
and you are placed in installation mode.
To Next Page
Loading...
