Radwin 2000 Series - Setting up a BRS;EBS link using RADWIN 2000 2.5 GHz Band

Setting up a BRS/EBS link using RADWIN 2000 2.5GHz Band Chapter 24
RADWIN 2000 User Manual Release 2.6.40 24-5
Setting up a BRS/EBS link using RADWIN 2000 2.5GHz
Band
The key issue in setting up a RADWIN 2000 2.5GHz Band BRS link is the choice of an appro-
priate channel bandwidth (CBW), which in turn depends on whether you are leasing a single,
double, triple or quad band set.
RADWIN BRS radios operate with channel bandwidths selectable from 5, 10 and 20 MHz.
Choose your channel bandwidth in accordance with Table 24-3.
Note
RADWIN does not support the bands labeled J and K in Figure 24-1.