Radwin 2000 Series - Lightning Protector

Lightning Protector Appendix A
RADWIN 2000 User Manual Release 2.6.40 A-9
Lightning Protector
Electrical
Compatible Interfaces 10/100/1000BaseT
Data Rates Up to 1000Mbps
Nominal Operational Voltage 48 VDC
Maximum Operational Voltage 60 VDC - 650 mA
Maximum Continues current 1 A
Impedance 90 to 110 Ohm
Connection type RJ45 CAT 5e STP (shielded)
Pin-out 8 wires + shielding
Pins Protected All pins protected
Response time <5 microseconds (with ODU)
Nominal discharge currents
Line to Line 500 A @ 8/20μs
Line to Ground 2000 A @ 8/20 μs
Impulse Discharge Current
20000 A, 8/20 μs 1 operation minimum
10000 A, 8/20 μs > 10 operations
2000 A, 10/350 μs 1 operation
200 A, 10/1000 μs > 300 operations
200 A, 10/700 μs > 500 operations
Impulse Spark-over
DC Spark-over ±20 % @ 100 V/s 150 V
100 V/μs 350 V
1000 V/μs 500 V
Capacitance < 2 pF
DC Holdover Voltage 80V
Mechanical
Enclosure Metal
Connection to bonding Network Screw
Dimensions 150mm
Weight 220 gram (0.22Kg)
Environmental
Operating temperature -40 to +60
Storage temperature -50 to +70