Radwin 2000 Series - Page 391

User Port Connectors Appendix B
RADWIN 2000 User Manual Release 2.6.40 B-2
User Port Connectors
LAN Port
The LAN 10/100BaseT interface terminates in an 8-pin RJ-45 connector, wired in accordance
to Table B-3.
Trunk Ports - E1/T1 RJ45 Connector
The E1/T1 interfaces terminate in 8-pin RJ-45 connectors, as shown in Table B-4 below:
Hot Standby Port RJ-11
White/Brown 7 7
Brown 8 8
Table B-3: Fast Ethernet Connector Pinout
Function Signal Pin
Transmit Data (positive) TD (+) 1
Transmit Data (negative) TD (–) 2
Receive Data (positive) RD (+) 3
Receive Data (negative) RD (–) 6
Table B-4: Trunk Ports - E1/T1 RJ45Pinout
Function Signal Pin
Transmit Data Tip TxTip 1
Transmit Data Ring TxRing 2
Receive Data Tip RxTip 4
Receive Data Ring RxRing 5
Table B-5: Hot Standby RJ-11 Port Pinout
Signal
Pin
Side
A
Pin
Side
B
HSB out 12
HSB in 21
Ground 33
Ground 44
Table B-2: ODU/HSS Unit Connection Pinout (Continued)
Color
ODU
RJ-45
HSS
UNIT RJ-
45