Installation Chapter 5
RADWIN 2000 User Manual Release 2.6.40 5-7
7. Click OK at the
Password changed
success message.
Step 3, Channel Settings
RADWIN 2000 systems have a feature called Automatic Channel Selection (ACS). In the event
of sync loss, ACS chooses the first available channel in a list of monitored channels nominated
in the Channel settings window of Figure 5-6 below. A channel switch takes place suffi-
ciently fast as to ensure no loss of service.
Figure 5-6: Channel Settings - Automatic Channel Selection
The default frequency for the product is shown.
To select channels to be used by the link:
1. Select the installation frequency from the Installation Channel box.
Note
• A link password must contain at least eight but no more than 16
characters excluding SPACE, TAB, and any of “>#@|*?;.”
• Restoring Factory Defaults returns the Link Password to
wireless-
bridge
.
• If the link is inactive, then the link password may also be changed
from the Site Configuration dialogs. See page 8-20.
To Next Page
Loading...
