Rage Super Cub 750 User Manual

Specifications
Wingspan: 750mm (29.52 inches)
Length: 520mm (20.47 inches)
Flying Weight: 210g (7.40 oz.)
  Baery:    7.4V2S500mAhLiPo
  Motor:    180Brushed/Geared
  ESC:     10ABrushed
  Charger:    USB2SLiPoCharger
  Gyro:    PASS(PilotAssistStabilitySoware)
  Transmier:   2.4GHz4channel

Rage Super Cub 750 Specifications

General

Brand	Rage
Model	Super Cub 750
Category	Toy
Language	English

Summary

Specifications

Super Cub 750 Story

Safety Precautions

FCC Information

LiPo Battery Warning

Charging LiPo Battery

Super Cub 750 Assembly

Landing Gear Installation

Install the landing gear wire into the front of the battery box and secure with screws.

Battery Installation

Insert battery into fuselage box, turn on transmitter, then plug in battery. Activate LED with balance connector.

Center of Gravity (CG) Setup

CG is 30-5mm back from wing leading edge. Correct CG critical for performance.

Transmitter Details

Control Functions

Servo Reversing

Arming the Motor

Elevator Control Movement

Rudder Control Movement

Aileron Control Movement

Pilot Assist Stability Software (PASS)

Full Assist Mode

Limits roll, climb, dive angles; engages self-leveling for new pilots. Release sticks for normal flight.

Partial Assist Mode

Allows greater input, increased angles, but no inverted flight or loops. Self-leveling remains.

No Assist Mode

Disables all electronic stability control for full aerobatic flight capabilities.

First Flight Procedures

PASS System Calibration

Parts List

Limited Warranty