To Next PageTo Next Page
Need help?Do you have a question about the RAID 4-Bay and is the answer not in the manual?
Explains the meaning of various LED indicators on the front panel for system status and activity.
Provides step-by-step instructions for the physical installation and assembly of the drive enclosure.
Guides users through the process of selecting and configuring the desired RAID mode for the enclosure.
Details the LED indicators for RAID 0 Spanning mode, showing active and data transfer states.
Explains the LED status for RAID 0 Striping mode, covering active and data transfer indicators.
Describes the LED indicators for RAID 1 Mirroring mode, including active, transfer, and rebuild states.
Details the LED indicators for RAID 3 mode, showing active, data transfer, and rebuild/error conditions.
Outlines the LED display for RAID 5 mode, showing active, data transfer, and rebuild/error states.
Explains the LED status for RAID 10 mode, covering active, data transfer, and rebuild/error indicators.
Instructions for initializing HDDs on Windows 2000/XP, noting MBR limitations and volume size.
Steps for initializing HDDs on Windows Vista, covering MBR and GPT partition styles.
Process for initializing HDDs on Windows 7, including disk initialization and formatting steps.
Guide for initializing HDDs on Macintosh OS, using Disk Utility to erase and format drives.
General