EasyManua.ls Logo

Raider RD-BKMD03 - Technical Data

Raider RD-BKMD03
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Original instructions for use
Dear Customer,
Congratulations on the purchase of machinery from the fastest growing brand of electric and pneumatic
tools - RAIDER. When properly installed and operating, RAIDER are safe and reliable machines and work
with them will deliver a real pleasure. For your convenience has been built and excellent service network of
45 services across the country.
Before using this machine, please carefully acquainted with these “instructions’ manual”.
In the interest of your safety and to ensure proper use and read these instructions carefully, including
the recommendations and warnings in them. To avoid unnecessary errors and accidents, it is important that
these instructions will remain available for future reference to all who will use the machine. If you sell it to a
new owner “Instructions’ manual” must be submitted along with it to enable new users to become familiar
with relevant safety and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner of the
trademark RAIDER.
Address: Soa City 1231, Bulgaria “Lomsko shausse” Blvd. 246, tel +359 700 44 155, www.raider.bg;
www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008 with scope
of certication: Trade, import, export and servicing of hobby and professional electrical, mechanical and
pneumatic tools and general hardware. The certicate was issued by Moody International Certication Ltd,
England.
Technical data
Battery type and capacity Lead - acid, 12 V / 10 Ah
Max. battery operating mode 6 h
Charger
Input voltage: 240 V-AC ~ 50 Hz
Output voltage: 12 V-DC, 1.2 A-1.7 A
Tank 16 L
Tank material PE
Type of liquid
Water solutions of pesticides (insecticides, fungicides and
herbicides)
Spray height 7 m (with certain nozzles)
Horizontal spraying length 8 m (with dened nozzles)
Spray nozzles 5 nozzles
Length of telescopic extension of stainless steel 85 cm
Working pressure 0.2 - 0.45 MPa (2 - 4.5 bar)
Pump
Voltage - 12 V DC, Flow rate - 4 L / min,
Max. pressure 0.62 MPa
The length of the hose 1.5 m
EN