Raijintek NYX PRO - User Manual

To Next Page

Screw #6-32 L10 × 6

For HDD at Bottom

Screw M3 L5 × 17

For MB Stand-off

Screw L3.5 × 2

To Lock the Bottom of HDD & SSD

Screw #6-32 L4 × 6

For Side Wing

HDD & SSD Rubber Pad × 10

For the Bottom of the HDD & SSD

Allen Key × 1

For Screws with Hexagonal Sockets

Velcro × 4

For Cable Tie

Holder × 2

To Hold VGA Cards

OPEN FRAME PERFORMANCE MONSTER

GLASS

PCI CARD

UNFOLDING

MOTHERBOARD

Fan Screw × 4

For Fan

Screw M3 L8 × 12

For SSD on MB Tray

Screw #6-32 L8 × 6

For HDD on MB Tray

Mounting Tool × 1

For MB Stand-off

PCIe - Riser Cable 500mm × 1

For VGA Card

Side Wing × 2

Screw #6-32 L5 × 8

For VGA Holder

Stand-off L6 × 3

For Motherboard Tray

Screw #6-32 L6 × 4

For PSU

Screw M3 L10 × 4

For SSD at Bottom

Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Raijintek NYX Pro

Nero, Rosso o cerca il tuo prodotto tra le migliori offerte di Case e Alimentatori

Need help?

Do you have a question about the Raijintek NYX PRO and is the answer not in the manual?

Summary

Component Identification and Hardware

Fasteners and Fixings

Lists all screw types, quantities, and associated hardware like Velcro and mounting tools for case assembly.

Cables and Accessories

Details essential accessories such as PCle riser cables, holders, and rubber pads for component installation.

Front Radiator Installation

Radiator Mounting Steps

Illustrates the process of attaching the front radiator to the computer case.

Power Supply Unit (PSU) Installation

PSU Mounting Procedure

Details the steps for correctly installing the power supply unit into the case.

Hard Disk Drive (HDD) Installation

HDD Installation Guide

Provides instructions for mounting Hard Disk Drives within the chassis.

Solid State Drive (SSD) Installation

SSD Mounting Instructions

Details the steps required to install Solid State Drives.

Pump Installation

Pump Mounting Procedure

Illustrates the process for installing the water cooling pump.

Wings Assembly

Side Panel Assembly

Details the steps for assembling the side panels or 'wings' of the case.

Top Radiator Installation

Top Radiator Mounting

Provides instructions for installing a radiator at the top of the case.

Raijintek NYX PRO Specifications

General

Model	NYX PRO
Manufacturer	Raijintek
Type	Case
Compatibility	Mini-ITX
Material	Steel
Color	Black
Motherboard Compatibility	Mini-ITX
Drive Bays	2x 2.5"
Cooling Support	1x 120mm (Rear)
Radiator Support	120mm (Rear)
Front Ports	2 x USB 3.0