EasyManua.ls Logo

Rain Bird R-VAN1318 User Manual

Rain Bird R-VAN1318
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
R-VAN Adjustable Rotary Nozzle Installation Guide
Rain+Birdt
R-VAN Adjustable Rotary Nozzle
Installation Guide
Introduction
Rain Bird R-VAN Adjustable Rotary Nozzles provide
water eciency and design exibility. R-VAN Adjustable
Rotary Nozzles feature rotating stream technology which
uniformly delivers water at a low precipitation rate,
signicantly reducing runo and erosion. Retrotting
standard spray nozzles with R-VAN Adjustable Rotary
Nozzles can reduce ow by up to 60% and improve water
eciency by up to 30%. Nozzle spray pattern and distance
are easily adjusted by hand with no tools required.
Models
R-VAN1318
Black Rotary Deector
13’ to 18’ (4,0 to 5,5m) radius
45° to 270° arc
R-VAN1724
Yellow Rotary Deector
17’ to 24’ (5,2 to 7,3m) radius
45° to 270° arc
ARC
ADJUSTMENT
CAP
ROTARY
DEFLECTOR
FILTER
SCREEN
RADIUS
ADJUSTMENT
DIAL
COLLAR
Features
Adjust arc and radius without tools
Color coded for easy identication of R-VAN model
Low precipitation rate reduces run-o and erosion
Maintains ecient performance at high operating
pressures without misting or fogging
Compatible with all models of Rain Bird spray bodies in
addition to a wide variety of risers and adapters
Three year trade warranty
Installation
Install Nozzle
R-VAN Adjustable Rotary Nozzles can be used for a new
installation or to replace existing sprinkler nozzles.
1. Unscrew and remove the existing sprinkler nozzle (if
applicable) from the spray body.
2. Screw the nozzle onto the spray body until secure.
Identify the Left Edge
A grooved white mark located on the collar, just under the
rotary deector, represents the left edge of the arc.
LEFT EDGE
INDICATOR
1. Align the nozzle to the left most edge of desired
coverage area (arc).
ARC
ALIGN LEFT EDGE
INDICATOR WITH ARC

Questions and Answers:

Rain Bird R-VAN1318 Specifications

General IconGeneral
ModelR-VAN1318
TypeRotary Nozzle
Spray PatternAdjustable
MaterialPlastic
Adjustable ArcYes
Spray Radius13-18 ft
Flow Rate0.4-1.5 gpm
Operating Pressure20-50 psi
ColorBlack
TrajectoryLow
Precipitation Rate0.4 to 1.2 inches/hour

Summary

Introduction to R-VAN Nozzles

Installation Guide

Install Nozzle

Steps to unscrew and secure the new sprinkler nozzle onto the spray body.

Identify the Left Edge Indicator

Locating the grooved mark on the collar to align the nozzle's left edge for arc adjustment.

Initial Start Up and Adjustments

Arc Adjustment Procedure

Instructions for adjusting the nozzle's spray coverage angle from 45° to 270°.

Radius Adjustment Procedure

Guidance on setting the nozzle's spray range for different models.

Re-program Controller Settings

Adjusting watering schedule run times based on the new nozzle's application rate.

Troubleshooting Common Issues

Nozzle Maintenance Guide

Nozzle Spacing Options for Irrigation

Square Spacing Layout

Sprinkler layout in a square pattern, best for areas with fixed boundaries.

Triangular Spacing Layout

Sprinkler layout in a triangular grid, suitable for irregularly shaped areas.

Related product manuals