Need help?Do you have a question about the Rain Master RME EAGLE EG Series and is the answer not in the manual?
Details the controller's irrigation programming features, including programs, start times, and runtimes.
Explains features designed for water savings like ET scheduling and rain delay.
Covers capabilities for identifying and responding to system faults and errors.
Covers flow sensing, monitoring, and limit settings for system protection.
Details Evapotranspiration based scheduling for automatic watering adjustments.
Outlines the controller's power requirements and output specifications.
Details physical dimensions, enclosure, and weight of the controller.
Guidelines for selecting an appropriate location for the controller unit.
Step-by-step instructions for physically mounting the controller unit.
Instructions for connecting the power supply to the controller.
Importance and procedure for grounding the controller for safety.
General procedures for connecting valves, sensors, and field wires to the controller.
Various options for wiring Master Valves and Pumps with the controller.
Specific wiring details for connecting a Master Valve.
How to operate and wire a normally closed master valve.
Instructions for installing a flow sensor in the main line.
Wiring connections for rain, freeze, or moisture sensors.
Wiring details for connecting valves to the controller.
Explanation of the different modes the controller can operate in.
How the controller operates in automatic mode, displaying time and date.
How to use the controller to suspend irrigation during rainy conditions.
Overview of the controller's keyboard layout and key functions.
Detailed usage of keys for programming, executing, and managing irrigation programs.
Setting the controller's internal clock and date for accurate operation.
Configuring Master Valve activation and type for specific programs.
Setting pump activation for specific programs.
Choosing between sequential or simultaneous program execution.
Enabling and configuring rain sensors, alarms, and other inputs.
Enabling and setting parameters for the flow sensor feature.
Specifying the pipe size for accurate flow sensor measurements.
Setting main line and unscheduled flow limits.
Configuring station upper flow limits.
Displaying the source of ET data used for runtime calculations.
Enabling ET-based irrigation programs for automatic watering adjustments.
Inputting the ET Reference value for accurate water savings calculations.
Inputting monthly historical ET data for the controller's location.
Configuring weather station input and manually entering ET data.
How the controller detects and reports system faults.
Diagnosing and resolving issues related to short circuits or faulty wiring.
Troubleshooting violations of main line and unscheduled flow limits.
Diagnosing and resolving situations where no flow is detected at a station.
Explanations of various prompts and messages displayed on the controller.
Practical examples demonstrating basic, flow, and ET programming.
General| Mounting | Indoor/Outdoor |
|---|---|
| Number of Programs | 4 |
| Cycle+Soak | Yes |
| Rain Sensor Input | Yes |
| Master Valve/Pump Start | Yes |
| Warranty | 5 years |
| Input Voltage | 120 VAC, 60 Hz |
| Enclosure Rating | NEMA 3R |
| Number of Start Times | 6 per program |
| Watering Duration | 1 minute to 12 hours |
To Next Page