©2018 Rainbow Treecare Scientific Advancements
6 Tech Support: 877-272-6747
Mix Rates For HTI 2000 Soil Injector
Always refer to product label for approved uses, rates, and precautions
The HTI injector distributes 250ml per injection and is intended to apply 1 injection site per 1” DBH.
Cambistat® Mix Rates:
• 11:1 Water:Cambistat ratio: To mix 1 gallon of ready to use solution = 3470 ml of water to 315 ml of Cambistat
Transtect™ Mix Rates:
• High rate: 1 pack/ 5” DBH – mix 1 packet to 1.25 liters of water
• Low rate: 1 pack/ 10” DBH – mix 1 packet to 2.5 liters of water
Lepitect™ Mix Rates:
• High rate: 1 - 10 oz. pack/ 25” DBH – 1 packet to 6.25 (or 7) liters of water
• Low Rate: 1 -10 oz. pack/ 50” DBH – 1 packet to 12.5 liters of water.
Xytect™ 2F Mix Rates:
• High rate: 12ml/ inch DBH- 48ml/ Liter of water
• Med rate: 6ml/ inch DBH – 24ml/ liter of water
• Low rate: 3ml/ inch DBH – 12 ml/ liter of water
Xytect™ 75 WSP Mix Rates:
• High rate: 1 packet/ 12” DBH – 1 packet to 3 liters of water
• Med rate: 1 packet/ 24” DBH – 1 packet to 6 liters of water
• Low rate: 1 packet/ 48” DBH – 1 packet to 12 liters of water
HTI 2000 Replacement Parts
SKU Part Unit Size
5217
HTI Replacement Cylinder O ring
1
5280
HTI Replacement Counter
1
5281
HTI Replacement Inject Button
1
5282
HTI Replacement Tip
1
5284
HTI Replacement Fill Valve Kit
1
5285
In-line Filter - HTI 2000
1
5289
Gasket - HTI In-Line Filter
1
5290
200 Mesh Screen - HTI In-Line Filter
1