12
Contents
Important Safety Instructions 2
Contents 3
Important Operational Instructions 3
Detail of Parts 3
Technical Data 4
Positioning the Loudspeaker 4
Installing and Attaching the Tweeter 5
Angle Mount Installation 6 Figure 1
Flush Mount Installation 6 Figure 2
Maintenance 7
Warranty 7
Attention: Important Operational Information. Please Read Before Installation.
The loudspeakers may only be operated with the indicated nominal power and only with the enclosed
crossovers or with the recommended high-pass and low-pass frequencies and slopes
Any operation without the enclosed crossovers or with frequencies and slops other than the
recommended may cause damage to the loudspeakers
Exchanging the "woofer" and "tweeter" terminals on the crossover, may destroy tweeters immediately
Do not open the the tweeter housing as this may destroy the tweeter
When connecting loudspeakers, crossovers , and amplifiers ensure polarity is the same throughout.
Exchanging of the polarity produces an unnatural sound that lacks in bass power
For reasons of technical safety, use only the enclosed screws to fasten the loudspeakers. If you fasten
them with any other materials, we do not accept any liability.
Contents and Details of Parts
SL-T25 Pro:
2 pieces. Tweeter SL-T25 Pro (Part-No. 241320)
SL-T25:
2 pieces. Tweeter SL-T25 (Part-No. 241306) J
2 pieces flush mount (Part-No. 161140) M
2 pieces angle mount (Part-No. 161141) O
2 pieces screw M4 x 5 P
2 pieces threaded bolt M4 to M5 Q
4 pieces self-tapping screw 3.9 x 19 R
2 pieces washer M4 T/U
2 pieces nut M5 V
2 pieces U-bracket W
1 piece Installation Instructions
To Next Page
Loading...
Need help?
General
