Rainin Pipet Lite Series - User Manual

continuously-
adjustable
digital
microliter
pipette
9 pipettes for
volume ranges
from
0.1 µL to 10 mL
Pipet-Lite 200 µL shown
pipet•lite
™
Magnetic Assist Pipette
9920-237 Rev C GENERIC 9/13/00 3:16 PM Page 1

Summary

Introduction to Pipet-Lite

Setting the Volume on Pipet-Lite

Pipet-Lite Filter Information

Tip Selection and Mounting

Tip Immersion Depth Guidelines

Pipetting Operation Procedures

Dispensing Liquids with Pipet-Lite

Step-by-step guide for dispensing liquids, including blowout and tip discard.

Pipetting Best Practices

Key recommendations for consistent and accurate pipetting techniques.

Pre-Rinsing Pipette Tips

Procedure for pre-rinsing tips to improve reproducibility with certain solutions.

Reverse Mode Pipetting Technique

An alternative pipetting method described for viscous liquids.

Handling Liquids of Varying Density

Temperature Considerations for Pipetting

Autoclaving Pipet-Lite Components

Removing the Tip Ejector Arm

Pipet-Lite Storage and Hangers

Troubleshooting Pipet-Lite Issues

Handling Acids and Corrosives

Pipette Service, Calibration, and Repair

Pipet-Lite Accuracy and Precision Specifications

Pipet-Lite Replacement Parts

Limited Warranty Information

Contacting Rainin for Support

Rainin Pipet Lite Series Specifications

General

Type	Manual Pipette
Channels	Single-channel
Battery Life	N/A (manual pipette)
Volume Range	0.1 µL to 10 mL (depending on model)
Ergonomics	Lightweight, low-force operation, finger rest
Calibration	Factory calibrated, user recalibration possible
Autoclavable	Yes
Accuracy	Varies with model and volume
Precision	Varies with model and volume
Material	Durable plastic materials
Tip Compatibility	Universal fit for most standard pipette tips; Rainin tips recommended for optimal performance
Tip Ejection	Yes, integrated tip ejector
Weight	Lightweight design