-12-
Strip the appropriate length of insulation from each wire and connect the wires on
the valve to the zones, one to the C wire and the other to the zones.
Connect the wires from the transformer to the AC terminals, or power the
irrigation controller by AC adaptor included.
When connecting the valve, please conrm whether the type of valve you
purchased matches that of HIC801W.
3.3.2 Valve Connection
1
!
2
!
3
!
TYPE
AC solenoid valve
SPECIFICATION
AC: 24V
SUPPORT IN-PLACE
DETECTION
√
USABLE
√
DC latch
solenoid valve
- × ×
AC motor valve AC: 24V × ×
DC latch
solenoid valve
- × ×
EN
To Next Page