Tips:
1. Rain display needs to work with the rain gauge, which is purchased
separately.
2. Weather display is the weather display for only today or both today
and tomorrow.
3. Warning settings is to set the ale for specic values of temperature
and humidity.
4. Sensor No. Settings is to set the display order for the sensors and
controllers.
5. Timing settings need to work with the precision clock, which is
purchased separately.
6. Receive Channel is only for when the sub-devices cannot be
connected. You don’t need to change it unless you have to.
2.3.6 Device Settings
- 19 -
To Next Page
Loading...