To Next PageTo Next Page
Need help?Do you have a question about the Rajant BreadCrumb ES1-2450R and is the answer not in the manual?
General| Frequency Band | 2.4 GHz |
|---|---|
| Max Data Rate | 54 Mbps |
| Wireless Standard | 802.11b/g |
| Mesh Networking | Yes |
| Power Supply | 12-24 VDC |
| Operating Temperature | -40°C to 70°C |
| Ethernet Ports | 1 x 10/100 Mbps |
| Enclosure | Rugged, IP67 |
| Interface | Ethernet |
| Encryption | AES |
Details FCC identification for the device models.
Provides Industry Canada certification information.
Compliance statement for Australian/New Zealand standards.
Crucial advice on antenna power, attachment, separation, and port usage.
Information on radio frequency exposure limits and device safety.
Guidance on device modifications and their impact on warranty and compliance.
Statement confirming professional installation is mandatory for the device.
Table detailing maximum power levels for US FCC compliance.
Table showing maximum power levels for IC Canada compliance.
Outlines the manual's objective and target audience.
Instructions on navigating and utilizing the user guide effectively.
Explains the basic definition and function of a BreadCrumb device.
Introduces the concept and operation of a wireless mesh network.
Details the device's radios, enclosure design, and environmental ratings.
Describes the type, number, and placement of antenna connectors.
Explains the ETH0 port's function for power and data connectivity.
Details the M8 connector for USB and reset, and the USB 2.0 interface.
Explains the meaning of the Status LED colors and patterns.
Describes how to configure the LED and use the zeroize/reset switch.
Introduces the BC|Commander software for monitoring and configuration.
Advises on using compatible BC|Commander and firmware versions.
Covers IP addressing schemes and the embedded DHCP server.
Details default radio channel assignments for different frequencies.
Discusses environmental factors impacting network performance.
Provides practical steps and best practices for mesh deployment.
Instructions for updating the device's firmware remotely and locally.
Procedures for resetting the device to factory defaults and clearing data.
Addresses issues with intermittent or lost network connections.
Solutions for problems preventing a device from joining the mesh network.
Guidance on resolving problems related to device power and boot-up.
Lists channels and frequencies for 2.4 GHz 802.11n radios.
Details channels and frequencies for 5 GHz 802.11ac radios.
Explains Dynamic Frequency Selection and Transmit Power Control for 5 GHz.
Emphasizes the need for professional installation and safety warnings.
Instructions and warnings for connecting antennas and cables.
Best practices for grounding and protecting equipment from surges.
Identifies and describes the components of the sealed RJ45 connector.
Step-by-step guide for terminating Ethernet cables with the sealed connector.
Instructions for mating the sealed RJ45 connector to the device port.
Details the installation of the pole mounting bracket.
Explains how to attach the DIN rail mounting bracket.
Recommends practices for grounding and surge protection of equipment.
Information on selecting and installing Ethernet surge protectors.
Guidance on using surge protectors for pole-mounted antennas.
Instructions for waterproofing RF and cable connections for outdoor use.
