rako RMT-500 - Page 3

Derating is a precaution to account for varying characteristics in the lighting loads; this can
include inrush currents and higher ambient temperatures, as well as recommendations from
3rd party lighting manufacturers.
Installation
Installation should only be carried out by a competent electrician.
● RMT500 modules should be mounted in areas that are adequately ventilated, dry,
and outside of any enclosed metal casings that may interfere with the wireless
signal.
● Modules should be mounted vertically, with the terminals at the bottom, or
horizontally.
● While the modules are designed to be maintenance-free, they should be mounted
in an accessible location should investigation or re-addressing of the units be
necessary.
● Ensure that the cable clamp is fitted tightly to secure the cables.
STEP 1:
Remove the cover and
cable clamp
STEP 2:
Insert the supply IN
conductors as well as the
load OUT conductors.
STEP 3:
Replace the cable clamp,
ensuring the cables fit
securely underneath
STEP 4:
Replace the cover
RMT-500 Manual Version 2.0.0