rako RMT-500 - Page 2

RMT-500 Instruction Manual
For more information relating to the RMT-500 see the Wireless Module Application Sheet,
Wireless RAK Application Sheet, and Wireless Device LED Diagnostics.
For programming a wireless system, including the device in this manual: Wireless Module
Programming Guide
Contents
1. What is the RMT-500?
2. Loadings
3. Installation
4. Initial Checks
5. Programming the RMT
6. Appendix 1: LED Diagnostics
What is the RMT500?
● The RMT-500 is a wireless trailing edge dimming module
designed for mains dimmable LEDs as well as tungsten and
incandescent lamps.
● The RMT-500 dimmer modules are not suitable for inductive
loads such as wire-wound transformers or electric motors.
● The RMT-500 can be controlled by any Rako device that transmits wireless
messages.
Loadings
Minimum
1W
Maximum
500W
Low-voltage transformer
loads
450W (de-rate by 10%)
Mains voltage LEDs
250W (de-rate by 50%)
NB
RMT-500 Manual Version 2.0.0