MTR302/A - R302F/A - R302L/A DHHS
MANUALE ISTRUZIONI / INSTRUCTION MANUAL
Modello/Model R302/A
General
2
R302/A - General
Ralco srl
• If repairs or product modifications and alterations have been performed by unauthorised
and unqualified persons;
• If unauthorized repairs and/or modifications have been performed;
• To damage caused by misuse or neglect, incorrect installation or accidental damage
including but not limited to lighting, water or fire;
• To use of unoriginal spare parts and accessories.
In-warranty spares will be available only upon return to Ralco, at the customer's expense, of
the parts considered to be faulty to allow assess the cause of the fault.
COMPONENTS NOT COVERED BY THIS WARRANTY
Consumable items such as lamps.
Items not produced by Ralco; these items will be accorded to warranty granted by the
constructor:
• Motors: 1 year
• Potentiometres: 1 year
• Electronic Boards: 1 year
• Laser: 12 months
Ralco reserves the right to decide if the collimator is to be repaired or substituted.
Defective material is to be sent to:
RALCO SRL
VIA DEI TIGLI 13/G
20853 BIASSONO (MI) - ITALIA
FAX: ++39-039-2497.799
EMAIL: RALCO@RALCO.IT
DISASSEMBLY
• Disconnect supply to the collimator.
• Remove the cover and disconnect the supply cables.
• Loosen the fixing Allen screws on the upper part of the collimator - care must be taken not
to let the collimator fall.
TRANSPORT AND STORAGE
• Suitable packing must be provided for the collimator.
• Place the collimator in a plastic bag to avoid packing material from entering the collimator.
• Use an appropriate packing for transport, shipment or storage; the collimator must be pro-
tected from rough handling. This will avoid damage to the collimator during transport, ship-
ment or storage.
• Limit Storage conditions:
• Ambient Temperature = from -40°C to +70°C
• Relative Humidity = from 10% to 95%
• Atm. Pressure = from 500 a 1060 hPa.
To Next Page
Loading...
