are for storage and maintenance purposes only.
Warning! Protect yourself and your neighbourhood against flying chips of
rock. Do not operate the hammer or carrier if someone is too close to the
hammer.
Do not use the hammer, as a standard assembly, under water. If water fills the
space where the piston strikes the tool, this generates a strong pressure wave
that may damage the hammer.
Warning! To avoid falling objects, do not use the product to lift other products.
The lifting eyes located on the product housing are to be used solely to lift or
handle the product itself. See “Lifting instructions” on page 8.
1. Prepare the carrier for normal excavation work. Move the carrier to the required
position. Set the drive to neutral.
2. Set the engine speed to the recommended engine RPM for correct amount of oil
supply.
To Next Page
Loading...