Need help?Do you have a question about the RAMMER 1655 and is the answer not in the manual?
Introduction to the manual, product, and general information.
Details for identifying the equipment model and serial number.
Overview of the hydraulic hammer and its basic components.
Essential safety precautions and hazard warnings for operating the hammer.
Step-by-step guide for using the hammer in various applications.
Guidelines and best practices for routine daily use of the hammer.
Procedures for safely attaching and detaching the hammer from a carrier.
Safe transport and parking positions for the hydraulic hammer.
Guidance for operating the hammer in specific or challenging environments.
Recommendations for proper long-term storage of the hydraulic hammer.
Recommended greases and procedures for lubricating the hammer tool.
Operation and maintenance of the automatic lubrication system.
How to set the correct amount of grease dispensed by the system.
Procedures for manual lubrication when the automatic system is unavailable.
Requirements, specifications, and viscosity for carrier hydraulic oil.
Details on the function and connection of the hydraulic oil cooling system.
Purpose, specifications, and maintenance of the hydraulic oil filter.
Regular checks and basic servicing performed by the operator.
Daily and periodic inspections by the operator for proper function.
Scheduled maintenance tasks to be performed by an authorized dealer.
Specific service schedules for operation in special conditions.
Additional maintenance tasks like cleaning and washing the attachment.
Step-by-step guide for removing and installing the hammer's working tool.
Wear limits, lubrication, and removal of the lower tool bushing.
Diagnosing and resolving issues preventing the hammer from starting.
Troubleshooting irregular hammer performance when blow power is maintained.
Identifying causes for irregular hammer operation and lack of power.
Diagnosing and fixing issues causing a reduced impact rate.
Resolving problems where the hammer continues to operate after being stopped.
Troubleshooting and solutions for hydraulic oil overheating.
Addressing frequent issues with tool breakage or premature wear.
Diagnosing and rectifying problems with the automatic greasing device.
Information on how to contact the dealer for additional support.
Comprehensive technical data and performance metrics for the hammer.
Detailed performance figures, dimensions, connections, and operating ranges.
Key physical measurements and overall size of the hydraulic hammer.
Specifications and requirements for the hammer's mounting bracket.
Details on available tools, including part numbers, lengths, weights, and diameters.
Compliance information and official declarations for the product.
To Next Page
General