Minimum working weight
1
1. Includes average mounting bracket and standard tool
1080 kg (2380 lb)
Hammer weight 870 kg (1920 lb)
Impact rate
2
2. Actual impact frequency depends on oil flow, oil viscosity, temperature, and material to be broken
540...920 bpm
Operating pressure
3
3. Actual pressure depends on oil flow, oil viscosity, temperature, material to be broken and back pressure
135...145 bar (1960...2105 psi)
Pressure relief, min
4
4. Minimum setting = actual operating pressure + 50 bar (730 psi)
190 bar (2755 psi)
Pressure relief, max 220 bar (3190 psi)
Oil flow range 90...130 l/min (23.8...34.3 gal/min)
Back pressure, max 10 bar (145 psi)
Input power 31 kW (42 hp)
Tool diameter 115 mm (4.53 in)
Pressure line connection (IN) SAE 6000 psi 1"
Return line connection (OUT) SAE 6000 psi 1"
Grease connection (G)
5
5. Located on the same side of the valve body as the return line (OUT) connection
BSPP-internal 3/8"
Air connection (A)
6
6. Located on the same side of the valve body as the pressure line (IN) connection
BSPP-internal 3/8"
Pressure line size (minimum inner
diameter)
26 mm (1.02 in)
Return line size (minimum inner diameter) 26 mm (1.02 in)
Optimum oil temperature 40...60 °C (104...140 °F)
Allowed oil temperature range -20...80 °C (-4...176 °F)
Optimum oil viscosity at operating
temperature
30...60 cSt
Allowed oil viscosity range 20...1000 cSt
Carrier weight
7
7. Check carrier's lifting capacity from carrier manufacturer
12...20 t (26500...44100 lb)
Noise level, measured sound power level,
LWA
8
8. According to European Union DIRECTIVE 2000/14/EC
123 dB (123 dB)
Noise level, guaranteed sound power level,
LWA
9
9. According to European Union DIRECTIVE 2000/14/EC
127 dB (127 dB)
To Next Page
Loading...