Charging
With power switch in off posion, connect the camera to a computer or
power supply with the included USB cable. While charging, the red light
next to the switch will illuminate and then shut off when it is fully charged.
The camera can be operated while charging, this will be indicated by the
blue light flashing and the red light staying solid.
Downloading iOS App & Android App
Please download the appropriate app for your device. The iOS app is
available free in the Apple Store, and the Android app free in the Google
Play store. Search for “RamCam”.
Power on / Connecng to the app
Slide the on switch to “ON” posion. While the blue light is solid the device
is in start up mode. Once the blue light begins to slowly blink it is ready to
connect to your device. NOTE: For iOS (Apple) the WiFi must be
To Next Page
Loading...