THIS TOOL IS FOR USE ONLY BY LICENSED OPERATORS.
YOU MUST OBTAIN A LICENSE BEFORE USING IT. A
TOOL OPERATOR'S CARD WILL BE ISSUED TO YOU
AFTER SUCCESSFULLY COMPLETING THE ENCLOSED
EXAM AND RETURNING IT TO RECEIVE YOUR CARD
AND ACTIVATE YOUR WARRANTY. OPERATOR'S
LICENSE CAN ALSO BE OBTAINED AT: www.ramset.com
MODEL HD22
LOW VELOCITY POWDER ACTUATED TOOL
Operator's Instruction & Training Manual
• The Ramset HD22 is a light duty tool designed for applications such as small
room additions and basement remodels. Tool life will vary depending on work site
conditions and application.
• The model HD22 is a low velocity piston type fastening tool. It is designed for
use with Ramset .22 caliber CW powder loads and Ramset fasteners.
• Do not operate the Model HD22 before studying this manual carefully and
thoroughly understanding the material contained herein.
IMPORTANT: The tool warranty is only activated upon receipt by ITW Brands of the
completed Operator's Exam.
Part #00022
Rev. 8/07
RD v001MA
To Next Page
Need help?
General
