QUICK REFERENCE
DEFAULT MASTER CODE: 1 2 3 1 2 3
(Ramset highly recommends that the master code should be changed for security)
OPTION 00
EXIT SETUP MENU
• Exit out of programming mode.
OPTION 01
SET DATE & TIME
• Set the date and time.
• Change the date and time (daylight savings)
Month: MM/DD/YY
Day: 1=Monday, 2=Tuesday,
3=3=Wednesday, 4=Thursday,
5=Friday, 6=Saturday, 7=Sunday
Time: HH:MM; 1=AM, 2=PM
OPTION 02
ADD ENTRY CODE
• Allows you to enter new codes with a corresponding name
• Codes can be 3-8 digits long• Codes can be 3-8 digits long
• Names can be 12 characters long
NUMERIC/ALPHA CODES
1 - 1 , . : - + 7 - P Q R S p q r s 7
2 - A B C a b c 2 8 - T U V t u v 8
3 - D E F d e f 3 9 - W X Y Z w x y z 9
4 - G H I g h i 4 0 - Space
5 - J K L j k l 5 * - Backspace
6 - M N O m n o 6 # - Enter
OPTION 03
ERASE ENTRY CODE
• Allows you to erase several codes quickly
OPTION 04
SET DISABLE CODE
• Default : None• Default : None
• The disable code is used to restrict all entry codes until the disable code is entered again.
• Holidays, vacations, lockdowns...etc.
OPTION 05
SET MASTER CODE
• Default : 123123
• Allows you to change the Master Code
OPTION 06OPTION 06
TIME ZONE SETUP
• Factory default : 24 hours a day/7 days a week
(To change the default, use option 07 in the program menu)
• Allows you to limit the days and times when a code is valid.
To Next Page
Loading...