OPTION 07
TIME ZONE DEFS
• Factory Default : 24 hours a day/7 days a week
• Sets the default for the time zones to allow you to enter several codes with the same time zones quickly
OPTION 08
ENTRY CODE SETUP
• Factory Default : Rly1=2 sec, Rly2=0 sec, usage life=0 (forever), Name=________• Factory Default : Rly1=2 sec, Rly2=0 sec, usage life=0 (forever), Name=________
(To change the default, use option 09 in the program menu)
• Set the relay times (from 0 - 14 seconds or 99 seconds for latch)
• Set the usage life of a code. The usage life is how many times the code can be used before it becomes invalid.
• Change the name on a code. The name is set when the code is first entered. At this time the name can be
added or changed.
OPTION 09
ENTENTRY CODE DEFS
• Factory Default : Rly1=2 sec, Rly2=0 sec, usage life=0 (forever)
• Sets the default for the entry code’s relay times and usage life to allow you to enter several codes with the same relay
times and usage life quickly
OPTION 10
REQ TO EXIT SETUP
• Factory Default : Rly1=0 sec, Rly2=0 sec
• Sets the amount of time that a relay will be activated when a signal is given to the keypad as a request to exit.• Sets the amount of time that a relay will be activated when a signal is given to the keypad as a request to exit.
OPTION 11
SET 7-DAY TIMER A
• Latches Rly1, Rly2 or Rly1 & Rly2 from a desired start time to a desired end time on specific days
OPTION 12
SET 7-DAY TIMER B
• Latches Rly1, Rly2 or Rly1 & Rly2 from a desired start time to a desired end time on specific days
OPTION 13OPTION 13
DISPLAY SETTINGS
• Max Length: 16 Characters
• Adjust LCD contrast (Default : 50)
• Change Banner Message (Factory default : Ramsetinc.com)
NUMERIC/ALPHA CODES
1 - 1 , . : - + 7 - P Q R S p q r s 7
2 - A B C a b c 2 8 - T U V t u v 8
3 - D E F d e f 3 9 - W X Y Z w x y z 9
4 - G H I g h i 4 0 - Space
5 - J K L j k l 5 * - Backspace
6 - M N O m n o 6 # - Enter
To Next Page
Loading...