QAMP-40 • 1
Ramsey Electronics Model No. QAMP40
Need a little extra boost for your QRP rig? Believe it or not, 20 watts is only
about an ‘S’ unit below a 100 watt rig! This nifty little amp will add some
“punch” to any QRP transmitter.
• Works great with Ramsey QRP rigs or any other 1-2 watt
transmitters
• Built-in T/R relay automatically switches between receive and
transmit
• Runs on 12 volts DC at 2 to 4 amps; ideal for field day or battery
operation
• Multistage low pass filter for a clean signal
• Operates all modes: CW, SSB, or AM
• Fast, easy, and fun 2 hour assembly
• Informative manual answers questions on theory, hook-ups, and
uses - enhances resale value too!
• Clear, concise assembly instructions carefully guide you to a
finished kit that works the FIRST time!
40 MTR 20 WATT QRP
LINEAR AMPLIFIER KIT
To Next Page
Need help?
General
