Ramsey Electronics SR2 User Manual

Ramsey Electronics Model No. SR2
• Enjoy hours of fascinating international listening using just a simple
indoor wire antenna
• Select portions of the 4 to 19.5 MHz shortwave band, easily re-tuned at
any time
• Smooth varactor diode tuning
• Excellent sensitivity and selectivity
• Front panel Volume and Tuning controls
• Multi-stage audio amplifier for room filling volume
• Well designed superhetrodyne circuit is easy to build, makes a nice
one-evening project
• Ideal scout, school, or club project
• Clear, concise step-by-step instructions carefully guide you to a
finished kit that not only works - but you’ll also learn too!
• Runs on a standard 9 volt battery
• Add our matching case and knob set for a finished ‘pro’ look
Have you ever wanted to get into the fascinating world of radio?
The Ramsey SR2 is a fine performer that will bring in the world
using just a few feet of wire as an antenna! Folks of all ages
have successfully built and enjoyed this easy and fun kit.
4-19.5 MHz
SHORTWAVE RADIO

Ramsey Electronics SR2 Specifications

General

Brand	Ramsey Electronics
Model	SR2
Category	Radio
Language	English

Summary

Understanding the SR2

Circuit Description

Explains the signal flow and operation of the SR2 receiver circuitry.

SR2 Parts Layout Diagram

SR-2 Block Diagram

Parts List

Building the SR2

Assembly Instructions

Step-by-step guide for assembling the SR2 shortwave radio kit.

Shortwave Antenna Ideas

Operation and Maintenance

Initial Testing and Adjustment

Procedures for pre-power-on checks and initial tuning of the receiver.

Troubleshooting Tips

Common problems and solutions for diagnosing and fixing SR2 receiver issues.

Warranty and Support

Defective Parts

Information on returning defective parts for testing and replacement within 90 days.

Missing Parts

Factory Repair of Assembled Kits

Refunds