EasyManua.ls Logo

Ramsey Winch RE8000 - User Manual

Ramsey Winch RE8000
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OM 912499-0914-L
RE8000
RE1000
RE12000
LAYER OF CABLE
5/16 DIA. (M)*
LINE PULL (LBS)
(KGS)
AMP DRAW 12V
MPM
12V-LINE SPEED FPM
(KGS)
RATED LINE PULL PER LAYER (LBS)
CABLE CAPACITY PER LAYER (FT)*
7
235
1,810
4,000
20
90
6.1
0
0
9.5
170
2.9
2,000
900
6,000
2,710
305
5.3
2.1
1.6
4.3
370
1.3
8,000
3,620
RE 8000
8,000
3,620
20
6
1
6,800
50
15
3,080
2
6,000
80
24
2,710
3
5,300
120
36
2,400
4
4,800
2,170
45
150
5
0.9
3
1.2
4
1.6
5.5
2.2
7.5
4.5
15
24V-LINE SPEED FPM
MPM
36
75
105
140 170
AMP DRAW 24V
6.5
200
1,810
4,000
16
80
4.9
0
0
8.6
150
2.6
2,000
900
6,000
2,710
250
5.3
2.0 1.6
4.4
290
1.3
8,000
3,620
RE 10,000
10,000
4,530
20
6
1
8,300
40
12
3,750
2
7,200
70
21
3,260
3
6,300
100
30
2,850
4
335
1.2
3.8
10,000
4,530
RATED LINE PULL PER LAYER (LBS)
(KGS)
CABLE CAPACITY PER LAYER (FT)*
3/8 DIA. (M)*
LINE PULL (LBS)
(KGS)
12V-LINE SPEED FPM
MPM
AMP DRAW 12V
LAYER OF CABLE
MPM
AMP DRAW 24V
14
4.2
30
7
2.1
50
5
1.5
85
4
1.2
110
3.5
1
135
2.5
0.7
160
24V-LINE SPEED FPM
LAYER OF CABLE
(3/8" DIA. WIRE ROPE)
LINE PULL (LBS)
FIRST LAYER (KGS)
AMP DRAW 12V
FIRST LAYER MPM
12V-LINE SPEED FPM
PULL PER LAYER KGS
RATED LINE LBS
CUMULATIVE CABLE (ft.)*
CAPACITY PER LAYER (M) *
5.3
250
2,710
6,000
8.6
150
2.6
900
2,000
5.5
200
2.0
4,000
1,810
8,000
3,620
290
4.4
1.6 1.3
3.8
335
1.2
10,000
4,530
RE 12,000/12,000X
12,000
5,430
20
6
1
10,000
40
12
4,530
2
8,600
70
21
3,890
3
7,500
100
30
3,390
4
380
1
3.3
12,000
5,430
0
0
16
4.9
80
38
125
28
95
18
60
7
25
CAPACITY PER LAYER (M) *
CUMULATIVE CABLE (ft.)*
(3/8" DIA. WIRE ROPE)
RE 12,000
RE 12,000X
24V-LINE SPEED FPM
FIRST LAYER MPM
AMP DRAW 24V
14
4.2
30
7
2.1
50
5
1.5
85
4
1.2
110
3.5
1
135
2.5
0.7
160
2
0.6
190
Ramsey Winch Company
OWNER’S MANUAL Front
Mount Electric Winches
Model RE 8,000
Model RE 10,000
Model RE 12,000
Model RE 12,000X
CONGRATULATIONS
You have purchased the fi nest winch available in its
service class. It features a strong worm and gear
drive to provide load-reversing protection. An exclu-
sive semi-automatic RAM-LOK clutch disengages
for free spooling and is spring loaded for positive
engagement. It was designed and manufactured
to provide you with the utmost in utility. As with any
device that combines power and movement in
its use, there are dangers if improper1y used. At
the same time, there are easier and faster ways
for getting the job done if certain precautions are
taken fi rst. Please read this manual carefully. It
contains useful ideas in obtaining the most effi cient
operation from your Ramsey Winch and safety pro-
cedures you need to know before beginning use.
When you follow our guidelines for opera-
tion your Ramsey Winch will give you many
years of satisfying service. Thank you for
choosing Ramsey. You will be glad you have
one working for you.
Please Note: Ramsey RE 8000, RE 10,000
and RE 12,000 Series winches are designed
for front mount vehicle use. The winches are
not designed for and should not be used in
industrial applications (car haulers/carriers,
wreckers, hoisting,etc.), and Ramsey does
not warrant them to be suitable for such use.
Ramsey makes a separate, complete line
of winches for industrial/commercial use.
Please contact the factory for further infor-
mation.
CAUTION: Read and understand this manual before installation and operation of
winch. See safety precautions.

Table of Contents

Questions and Answers

  • W
    wwestAug 15, 2025
    Why does my Ramsey Winch Other motor run hot and lack power?
    • D
      David StewartAug 15, 2025
      Overheating and insufficient power in your Ramsey Winch Other motor can stem from several causes. Extended operation without cooling periods is a primary reason, so allow for cooling-off periods. Other potential causes include: * An insufficient battery: Check the battery terminal voltage under load; if it's 10 volts or less, replace the battery or add another in parallel. * Undersized electrical cables: Ensure the cable from the battery to the winch and the ground strap are No. 2 equivalent or larger, especially if longer than 15 feet. * Poor electrical connections: Inspect all connections for looseness or corrosion; tighten, clean, and grease them. * An insufficient charging system: Consider replacing it with a higher-capacity system.
  • C
    Christina TerrellAug 18, 2025
    What to do if my Ramsey Winch RE8000 Other motor will not operate?
    • J
      James WoodAug 18, 2025
      If your Ramsey Winch Other motor isn't working, several issues could be the cause. First, check the solenoid; it might be inoperative or stuck. Try jarring it to free the contacts and test by applying 12 volts to the coil terminal—you should hear a click. Also, the remote control switch could be faulty. Disengage the winch clutch, remove the remote control switch plug, and jump the pins at the 8 and 4 o'clock positions, then the 8 and 10 o'clock positions, to see if the motor runs. Additionally, check for loose connections on the underside of the hood and on the motor itself. If the solenoids are working, check for voltage at the armature post; if there's no voltage, replace the motor.
  • A
    andrea03Aug 21, 2025
    How to fix a Ramsey Winch RE8000 that runs in one direction only?
    • D
      Diane LangAug 21, 2025
      If your Ramsey Winch Other motor only runs in one direction, it could be due to an inoperative or stuck solenoid. Try jarring the solenoid to free the contacts and test it by applying 12 volts to the coil terminal; you should hear an audible click. Alternatively, the remote control switch might be faulty. To check, disengage the winch clutch, remove the remote control switch plug from the socket, and jump the pins at the 8 and 4 o'clock positions. The motor should run. Then, jump the pins at the 8 and 10 o'clock positions; the motor should run.
  • N
    Nicole WadeAug 25, 2025
    Why is my Ramsey Winch RE8000 leaking oil from the housing?
    • A
      amberwilliamsAug 26, 2025
      Oil leaks from the housing of your Ramsey Winch Other can be due to several reasons. New seals may leak until they seat to the shaft. A damaged or worn seal will also cause leaks, requiring replacement. Too much oil in the housing can also be the culprit; drain excess oil according to the lubrication instructions. Lastly, a damaged gasket can lead to leaks, so consider replacing it.
  • C
    Cynthia SerranoAug 28, 2025
    What should I do if my Ramsey Winch RE8000 Other motor is water damaged?
    • C
      Cynthia DavisAug 28, 2025
      If your Ramsey Winch Other motor has water damage, perhaps from being submerged or exposed to a high-pressure car wash, allow it to drain and dry thoroughly. Then, run the motor without a load in short bursts to dry the windings.
  • Z
    Zachary OchoaSep 1, 2025
    Why is the clutch on my Ramsey Winch Other inoperative or binding?
    • K
      Kenneth WoodSep 1, 2025
      A clutch that is inoperative or binds on your Ramsey Winch Other can be caused by a dry or rusted shaft, which requires cleaning and lubrication. Another cause can be a dog point setscrew that is too tight. Remove the rubber plug from the clutch housing and rotate the setscrew outward until the clutch operates smoothly, then replace the rubber plug. A bent yoke may also cause this issue, requiring replacement of the yoke or shifter assembly. Finally, keys pulled out of shape by overload can be the problem. If the drum shaft keyways are rounded or damaged, replace the shaft and keys; if not, file off burrs and replace the keys.
  • R
    Rebecca BennettSep 4, 2025
    What to do if my Ramsey Winch RE8000 motor runs but the drum doesn't turn?
    • C
      Cassandra AndersenSep 4, 2025
      If the motor of your Ramsey Winch Other runs, but the drum does not turn, the first thing to check is whether the clutch is engaged. If it is, but the symptom persists, further disassembly of the winch will be necessary to determine the cause and implement repairs. Potential causes could include a sheared drum shaft key, a stripped bronze gear, or a parted shaft.
  • N
    nancydavisSep 7, 2025
    Why doesn't the clutch on my Ramsey Winch RE8000 lock at the disengaged position?
    • T
      tcarrollSep 7, 2025
      If the clutch on your Ramsey Winch Other doesn't lock when disengaged, the setscrew may be loose or worn. Remove the rubber plug from the clutch housing, tighten the setscrew, or replace it if necessary, and then replace the plug.
  • C
    christopher00Sep 12, 2025
    What if the clutch spring on my Ramsey Winch Other does not operate?
    • H
      hcampbellSep 12, 2025
      If the clutch spring on your Ramsey Winch Other is not working, the cause is likely a broken spring, which will require replacement.

Ramsey Winch RE8000 Specifications

General IconGeneral
ModelRE8000
Pulling Capacity8000 lbs
Rated Line Pull8000 lbs
Motor TypeSeries Wound
Gear Train3-Stage Planetary
Cable TypeWire Rope
Cable Length95 ft
Wire Rope5/16"
Battery Requirements650 CCA