Do you have a question about the Randall Diavlo RD100H and is the answer not in the manual?
Details what the warranty covers for materials and workmanship, including speaker and tube limitations.
Lists items not covered, such as shipping damage, misuse, neglect, and alterations.
Explains the mandatory procedure for returning products for service, including obtaining an RA number.
Specifies that all warranty service must be performed by authorized service centers.
Provides a comprehensive list of critical safety guidelines for operating the apparatus, including water proximity and cleaning.
Details the guitar input jack and the channel selector switch for Clean, Gain 1, and Gain 2.
Explains the function of gain and volume knobs for Clean, Gain 1, and Gain 2 channels.
Covers the boost function, EQ controls (Bass, Middle, Treble, Presence), and Master Volume.
Describes power switch, standby, fuse, speaker outputs, impedance, effects loop, and XLR output.
Details what the warranty covers for materials and workmanship, including speaker and tube limitations.
Lists items not covered, such as shipping damage, misuse, neglect, and alterations.
Explains the mandatory procedure for returning products for service, including obtaining an RA number.
Specifies that all warranty service must be performed by authorized service centers.
Provides a comprehensive list of critical safety guidelines for operating the apparatus, including water proximity and cleaning.
Details the guitar input jack and the channel selector switch for Clean, Gain 1, and Gain 2.
Explains the function of gain and volume knobs for Clean, Gain 1, and Gain 2 channels.
Covers the boost function, EQ controls (Bass, Middle, Treble, Presence), and Master Volume.
Describes power switch, standby, fuse, speaker outputs, impedance, effects loop, and XLR output.
| Power Output | 100 Watts |
|---|---|
| Number of Channels | 2 |
| Preamp Tubes | 3 x 12AX7 |
| Power Tubes | 4 x EL34 |
| EQ Controls | Bass, Middle, Treble |
| Speaker Outputs | 2 x 1/4" |
| Effects Loop | Yes |
| Footswitch | Yes |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| Weight | 50 lbs |
| Dimensions | 10.5 x 10.5 inches |
| Type | Tube Amplifier Head |
| EQ | 3-Band EQ |
Loading...