R&B Wire Products 100T User Manual

STANDARD, LARGE CAPACITY AND DELUXE ELEVATED LAUNDRY CARTS AND GARMENT RACK
ASSEMBLY INSTRUCTIONS
2902 W. Garry, Santa Ana, California 92704
714/549-3355 • 800/634-0555 Toll Free • Fax 714/549-0625
To Purchase - www.UNOCLEAN.com phone: 888-226-2724
TOOLS REQUIRED: Large screwdriver, two-7/16" open end (or box end) wrenches.
100E/T, 96B, 200F/S, 300G, 350E Cart and Basket Assembly: Center basket on cart. Using the four slotted roundhead
bolts (and nuts), provided, attach basket to cart through two end holes only in each metal strap (two per side). If no rack
is to be installed, tighten bolts securely. If rack is to be installed, leave finger tight and go to next step.
58, 56, 55 Double Pole Rack Assembly: Place long rack tubes down through inside of
basket and outside of cart. Use four long hex head bolts and nuts to attach. Attach
crossbar to top of rack using two short hex bolts and nuts.
91 Single Pole Rack Assembly: Place long rack tubes down through inside of basket and
outside of cart. Attach to end of cart using two long hex head bolts and nuts. Attach arm
to upright using one short hex head bolt and nut. Be sure arm faces toward center of basket.
Go back and tighten all bolts and nuts securely.
WARNING
• Do not remove carts from building.
• Never allow children (or adults) to ride in or on carts.
• Keep casters free of thread, lint, hair and other debris.
• Be sure casters roll freely and turn easily at all times.
If a caster does not roll properly, remove cart from service immediately.
• Place all loads in center of basket for balance.
• Maximum cart capacity: 100E/T, 96B, 200F/S, 300G, 350E - 50 lbs.
100E, 96B
100T, 200S
100E58, 96B58, 200F56, 300G55 100E91
WALL MOUNTED
WARNING SIGN (903)
Warning Signs Printed
in English or Spanish.
Both available through
your local distributor.
BASKET MOUNTED
WARNING SIGN (902)
Warning Signs Printed
in English, available
through your local
distributor.

R&B Wire Products 100T Specifications

General

Brand	R&B Wire Products
Model	100T
Category	Outdoor Cart
Language	English

Summary

Assembly Instructions

Tools Required for Assembly

Lists essential tools including large screwdrivers and 7/16" open or box end wrenches for assembly.

Cart and Basket Assembly

Instructions for attaching the basket to the cart using provided slotted roundhead bolts and nuts.

Double Pole Rack Assembly

Procedure for attaching the double pole rack tubes and crossbar to the laundry cart basket.

Single Pole Rack Assembly

Steps to attach the single pole rack tubes, arm, and upright to the laundry cart basket.

General Safety Warnings

Important safety guidelines for cart use, including prohibitions on riding, caster maintenance, and load limits.

Warning Sign Information

Details on available wall-mounted (903) and basket-mounted (902) warning signs in English and Spanish.

Parts Included

Parts List for 100CEC Model

Details components for the 100CEC model: Chrome Base, Chrome 'E' Basket, Casters, Caster Bolts, Caster Nuts, and Hardware Kit.

Parts List for 200CFC Model

Details components for the 200CFC model: Chrome Base, Chrome 'F' Basket, Casters, Caster Bolts, Caster Nuts, and Hardware Kit.

Parts List for 300GC Model

Details components for the 300GC model: Chrome Base, Chrome 'G' Basket, Casters, Caster Bolts, Caster Nuts, and Hardware Kit.

Parts List for 56C Garment Rack

Details components for the 56C model: Chrome Crossbar, Chrome Upright Poles, Black Caps, and Hardware Kit.

Parts List for 58C Garment Rack

Details components for the 58C model: Chrome Crossbar, Chrome Upright Poles, Black Caps, and Hardware Kit.

Parts List for 91C Garment Rack

Details components for the 91C model: Chrome Pendant Arm, Chrome Upright Pole, and Hardware Kit.

Parts List for 55 Garment Rack

Details components for the 55 model: Chrome Crossbar, Upright Chrome Poles, Black Caps, and Hardware Kit.