EasyManua.ls Logo

R&B Wire Products PSS-3C User Manual

R&B Wire Products PSS-3C
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SALES@RBWIRE.COM (800) 634-0555 RBWIRE.COM
ASSEMBLY INSTRUCTIONS
R
STEP
1
STEP
2
STEP
3
(1)
9/16" wrench
TOOLS REQUIRED:
(2) 7/16" wrenches
1 person assembly
If you ordered a Mobile Privacy Screen, determine where
you want the 2 locking casters positioned. With the 9/16"
wrench, screw casters into legs
If you ordered a Stationary Privacy Screen, place each
of the four crutch tips onto the ends of the leg feet.
Carefully lay the frame of the Privacy Screen down
onto the ground. Insert the leg tubes into the frame
and secure them with two 7/16” wrenches and
hardware provided.
NOTE: Save the extra panel rod end clip for future use.
Once legs are installed, stand the unit upright and
open the frame up so curtain panels can be installed.
WARNING
!
MODEL PSS-3C
Mobile Privacy Screen
MODEL PSS-3
Stationary Privacy Screen
OR
HARDWARE INCLUDED (Not to scale)
x4 Nuts
x6 Curtain rods
· Never stand or ride on this product.
· Keep casters free of debris.
· Do not hang anything on this product.
· Use caution when rolling over uneven surface.
x13 End clips
x4 Bolts
x4 Casters
x4 Crutch tips
Question and Answer IconNeed help?

Do you have a question about the R&B Wire Products PSS-3C and is the answer not in the manual?

R&B Wire Products PSS-3C Specifications

General IconGeneral
ModelPSS-3C
MaterialSteel
FinishChrome
Adjustable HeightNo
CastersYes

Summary

Assembly Instructions

Tools Required

Lists the tools needed for the assembly process.

Assembly Step 1: Attaching Casters/Crutch Tips

Attaching casters to mobile screens or crutch tips to stationary screens.

Assembly Step 2: Securing Leg Tubes

Laying frame flat and securing leg tubes with wrenches.

Assembly Step 3: Uprighting and Opening Frame

Standing unit upright and opening frame for panels.

Assembly Step 4: Attaching Curtains

Installing curtain panels onto the frame using rods and clips.

Assembly Step 5: Securing Curtain Rods

Fitting tabs into frame holes to secure both ends of the curtain rods.

Assembly Step 6: Completing Curtain Installation

Installing remaining curtains and adjusting for even coverage.

Safety Warnings

Important precautions for safe use and handling of the product.