TROUBLESHOOTING
PREHEATING
Short Circuit:
Light indicator will flash 3x,
and then shut down.
Low Power Warning:
When the voltage is lower than 20%
(3.2V), light indicator will flash Red 10
times and will automatically shut down.
Once the device is on, it will
automatically start preheat mode after
5 seconds to the set temperature.
The device will vibrate once when
starting preheat mode. When the set
temperature is reached, the device
will vibrate 2x.
At 440°F the device will end the heating
cycle after 2 minutes. All other
temperatures will end the heating cycle
after 3 minutes. The device will vibrate
2x and then turn off when the heating
cycle is finished.
To Next Page
Loading...
