Need help?Do you have a question about the Rane MA 6 and is the answer not in the manual?
General| Channels | 6 |
|---|---|
| Damping Factor | > 200 |
| Frequency Response | 20 Hz - 20 kHz, +0/-0.5 dB |
| Total Harmonic Distortion (THD) | <0.05% |
| Signal-to-Noise Ratio | >100dB |
| Input Connectors | XLR |
| Output Connectors | Binding posts |
| Input Impedance | 20k ohms |
Covers essential safety precautions for operating the apparatus.
Details the controls and indicators on the front of the MA 6 amplifier.
Explains the rear panel connectors and features of the MA 6 amplifier.
Explains how input jacks automatically link channels for bridging or stereo operation.
Details the cooling fan's operation and maintenance requirements for optimal performance.
Explains how the MA 6's limiters enhance output levels without causing clipping.
Describes how the MA 6 can be reconfigured for different channel and power requirements.
Warns about the MA 6's high current draw and potential to trip circuit breakers.
To Next Page