EasyManuals Logo

Rane serato SCRATCH LIVE User Manual

Rane serato SCRATCH LIVE
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation
1) Install the software
Mac
1. Insert the Software Installation CD and double-click the in
-
staller icon.
Windows XP
1. Insert the Software Installation CD. If Setup doesn’t start auto
-
matically, browse to the CD drive and run setup.exe.
2. Follow the on-screen instructions. Once the installation is
complete, Scratch Live appears in the Start Menu under All
Programs > Serato > Scratch Live.
2) Connect and Install the Hardware
Mac
Mac users need only connect the hardware after installing the
software. No extra hardware installation is required.
Windows XP
1. Connect the Scratch LIVE Interface to your computer using the
supplied USB cable.
2. e
Windows New Hardware Wizard appears.
3. Insert the Software Installation CD if it’s not already inserted,
then press Next.
4. Windows may complain that the software driver is not digitally
signed. Choose Continue Anyway.
5. Click Finish once installation is complete.
QUICK START
























  
  

Connections
1. Connect your turntables (or CD players
) to INPUTS 1 and 2 of the Scratch LIVE
hardware.
2. Connect the LINE OUTPUTS of the Scratch
LIVE hardware to the Line Inputs on
your DJ mixer, check that those inputs are
switched to line level.
3. Connect the USB cable from the Scratch
LIVE hardware to your Mac or PC.
Optional extra connections
If you are using turntables, connect their
ground wires to the ground post of your
mixer.
Connect the THRU OUTPUTS of the
Scratch LIVE hardware to the mixer’s
phono inputs when using turntables; con-
nect these to the mixer’s line inputs when
using CD players. is allows you to bypass
Scratch LIVE to play normal records or
CDs.
Connect a dynamic microphone to the MIC
INPUT of the Scratch LIVE hardware to
scratch your own mic recordings as if they
are on vinyl.
Connect a ¼" to ¼" cable from the MIC
THRU jack on the Scratch LIVE hardware
to the microphone input on your DJ mixer
to allow normal use of the microphone,
independent of Scratch LIVE. (Note: power
is required, either from the USB port or an
external 9VDC power supply. See manual
for details.)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rane serato SCRATCH LIVE and is the answer not in the manual?

Rane serato SCRATCH LIVE Specifications

General IconGeneral
BrandRane
Modelserato SCRATCH LIVE
CategoryDJ Equipment
LanguageEnglish

Related product manuals