RANE SL1 FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.5.0
37
RECORD BURN - This section of the control
vinyl has been worn. Swap sides or use
the track start offset.
LEFT CHANNEL MISSING - The signal from the
needle is not reaching the SL1. Check the
cable and cartridge connections.
RIGHT CHANNEL MISSING - The signal from
the needle is not reaching the SL1. Check
the cable and cartridge connections.
BAD RECORD BURN - Your record is badly
worn and Scratch Live is unable to track.
Swap sides or get new vinyl ASAP.
LEFT CHANNEL IS NOISE - Left signal has
been lost with a noisy loose connection.
RIGHT CHANNEL IS NOISE - Right signal has
been lost with a noisy loose connection.
TONEARM IS SLIGHTLY TOO LIGHT -
Susceptible to dust and vibration. Adjust
the tonearm.
SIGNALS ARE SUMMING TO MONO - The left
and right signals have been combined into
one somewhere in your signal chain.
RIGHT CHANNEL IS INTERFERENCE - Right
signal has been lost with a noisy loose
connection and left channel crosstalk.
To Next Page
Loading...