Need help?Do you have a question about the Rane SL1 and is the answer not in the manual?
General| Sampling Rate | 44.1 kHz |
|---|---|
| Bit Depth | 16-bit |
| Compatibility | Serato Scratch Live |
| Connectivity | USB 1.1 |
| Phono Preamps | Yes |
| USB | USB 1.1 |
| Inputs | 2 x RCA (phono/line) |
| Outputs | 2 x stereo RCA |
Guide on installing Scratch Live software on Mac and Windows.
Steps to integrate the SL1 unit into a DJ setup.
How to connect audio sources to the SL1 inputs.
How to route the SL1 audio outputs to your mixer.
Instructions for connecting the SL1 to a computer via USB.
Recommendations for turntable setup, including grounding.
Step-by-step guide to calibrating the control signal.
Explanation of the noise threshold setting for signal interpretation.
Guide on loading music files into the Scratch Live library.
Process for analyzing music files to build waveforms and BPM data.
Explanation of the Virtual Deck display and functions.
Using the tempo matching display for beat matching.
Default mode mimicking normal vinyl playback.
Mode observing relative movement, disabling needle dropping.
How to set up to five cue points per track.
How to load audio files into the SP-6 sample player slots.
Controls for pitch adjustment, bending, nudging, and keylock.
Controlling multiple effects slots with one Ultra Knob.
Individual control of effects within each slot.
Steps for connecting and configuring MIDI controllers.
Mapping MIDI controls to Scratch Live functions.
Creating and managing crates for music organization.
How to record audio input directly within Scratch Live.
Techniques for mixing using a single turntable or CD player.
Shortcuts for deck playback, cueing, and pitch control.
Adjusting buffer size for audio latency and performance.
Setting input levels for turntables and CD players.
Automatically setting track gain levels for uniform volume.
Solutions for audio dropouts, clicking, and popping.
Troubleshooting unplayable or poorly performing MP3 files.
Descriptions of various corrupt MP3 file errors and their causes.
Descriptions of corrupt WAV file errors and their causes.
Identifying a clean signal with 100% tracking in the scope.
Troubleshooting when no control signal is detected.
Cleaning needles and vinyl for proper tracking.
Addressing issues related to damaged or worn styli.
Troubleshooting signal loss in the left channel.
Troubleshooting signal loss in the right channel.
Terms and conditions of the US limited warranty.
Procedures for factory and authorized service.
To Next Page