Range Road EcoPro Series - Machine Adjustments; Saw Chain Engagement Arm Adjustment

EcoPro
Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
Page 10
Adjustments
Fig.1
Fig.2
The Saw Chain engagement arm is used to control when the chain starts to spin. This is an on/off valve,
when the engagement arm is in the up position the bolt head from the lever touches the bolt on the
valve, (Fig. 1)disengaging the chain. Fig. 2 shows when the engagement arm is pulled forward, allowing
the valve to automatically move to the on position, starting the saw motor.