15
NAVIGATION
TOUCH SCREEN NAVIGATION
BLUETOOTH® WIRELESS TECHNOLOGY DEVICES
PHONE
Note: The process of pairing and connecting a phone to
the vehicle varies depending on the type of phone used.
Use the following procedure in conjunction with your
phone manufacturer’s instructions.
Connection must be made with the ignition switched on
or with the engine running.
Pairing and connecting using a phone
1. Switch the ignition on and make sure that the Touch
screen is active.
2. Select GENERAL SETTINGS, then Bluetooth.
3. From the list, select Make system discoverable.
4. Switch on your phone or device’s connection. Make
sure that your phone or device is in discoverable
mode, sometimes referred to as find me mode (see
your phone or device’s operating instructions for more
information).
5. A Passkey number appears on the phone or device.
If this number matches the number on the Touch
screen, touch Yes, or press Pair on the phone or
device.
6. Once a phone or device is paired, it appears on the
connected device’s list and on the PHONE screen.
Pairing and connecting using the Touch screen
1. Switch on your phone or device’s connection. Make
sure that your phone or device is in discoverable
mode, sometimes referred to as find me mode (see
your phone or device’s operating instructions for more
information).
2. Switch the ignition on and make sure that the Touch
screen is active.
3. Select GENERAL SETTINGS, then Bluetooth.
4. Select Search for Bluetooth Devices.
5. The system searches for a phone or device and, if
found, the phone or device displays on the screen.
If the phone or device is not found, NO DEVICES
FOUND is displayed.
6. A Passkey number appears on the phone or device.
If this number matches the number on the Touch
screen, touch Yes.
Calls via the Touch screen
With a paired and active phone, press the Phone button
to the right of the Touch screen.
1. Select Messages, Contacts or Call lists.
2. Touch to search for a new device, or change to
another, paired phone or device.
3. Touch to display the keypad. Use the keypad to enter
a phone number.
4. To make a call, touch the green connect icon. The
icon changes to a red connected call icon. To end a
call, touch the red icon.
Calls via the steering wheel controls
Connect: Press and release to send or accept a
call, or to access the Last 10 dialled list. Press
and hold to access the Contacts.
Disconnect: Use to end or reject a call.
Voice control talk button. The screen displays
available options. Say Phone and follow the
instructions.
The steering wheel media controls can be used to adjust
the phone volume and to scroll through Contacts.
Bluetooth Connectivity
For the latest compatibility information, go online
to www.landrover.com. Select OWNERSHIP and
then Bluetooth.
Map view
1. Touch to select the NAV MENU.
2. Touch to select the ROUTE menu.
3. Touch to set a selected destination.
4. Touch to show information for a Point Of Interest
(POI), or for traffic information.
5. Touch to reduce the map size.
6. Drag the indicator along the scale to enlarge or
reduce the map size, or touch the line for the position
required.
7. Touch to change between estimated time to
destination and distance to destination.
8. Touch to enlarge the map size.
9. Touch to select the SETTINGS pop-up menu, select
Navigation, to view the settings.
10. Next manoeuvre icon and the distance to the next
manoeuvre. Touch to hear Voice guidance for the next
manoeuvre.
11. Indicates the vehicle’s position on the set route.
12. The route that has been set.
LRL219560161 NLI.indd 15 28/04/2015 13:50:33
To Next Page
Loading...
