14
NAVIGATION
TOUCH SCREEN NAVIGATION
BLUETOOTH® WIRELESS TECHNOLOGY DEVICES
PHONE
Note: The process of pairing and connecting a phone to
the vehicle varies depending on the type of phone used.
Use the following procedure in conjunction with your
phone manufacturer’s instructions.
Connection must be made with the ignition switched on
or with the engine running.
Pairing and connecting using a phone
1. Switch the ignition on and make sure that the Touch
screen is active.
2. Select GENERAL SETTINGS, then Bluetooth.
3. From the list, select Make system discoverable.
4. Switch on your phone or device’s connection. Make
sure that your phone or device is in discoverable
mode, sometimes referred to as find me mode (see
your phone or device’s operating instructions for more
information).
5. A Passkey number appears on the phone or device.
If this number matches the number on the Touch
screen, touch Yes, or press Pair on the phone or
device.
6. Once a phone or device is paired, it appears on the
connected device’s list and on the PHONE screen.
Pairing and connecting using the Touch screen
1. Switch on your phone or device’s connection. Make
sure that your phone or device is in discoverable
mode, sometimes referred to as find me mode (see
your phone or device’s operating instructions for more
information).
2. Switch the ignition on and make sure that the Touch
screen is active.
3. Select GENERAL SETTINGS, then Bluetooth.
4. Select Search for Bluetooth Devices.
5. The system searches for a phone or device and, if
found, the phone or device displays on the screen.
If the phone or device is not found, NO DEVICES
FOUND is displayed.
6. A Passkey number appears on the phone or device.
If this number matches the number on the Touch
screen, touch Yes.
Bluetooth Connectivity
For the latest compatibility information, go online
to www.landrover.com. Select OWNERSHIP and
then Bluetooth.
To access navigation, press either the Navigation button
to the right of the Touch screen, or touch Navigation on
the HOME screen.
1. Where To?: Touch for setting a destination. When
a destination is selected, there are 4 further
options:
•
Yes to start navigation.
•
Options for the type of route.
•
Avoid to avoid a road feature.
•
Save to save the route to your Favourites.
2. Map View: Touch to view the map screen.
3. Favourites: Touch to view the list of stored
destinations.
4. Touch to select the SETTINGS pop-up menu, select
Navigation, to view the settings.
5. Stop Guidance: Touch to cancel the current route
guidance.
6. Emergency: Touch to see a list of emergency
services.
7. Information: Touch to display the following: Traffic,
Where am I, and Trip computer.
Settings
When using the Navigation system for the first time,
personal preferences should be set. These settings are
then applied whenever the Navigation system is used.
Settings include:
•
Speed limit warning.
•
Navigation guidance options.
•
Map display mode.
•
Map view.
•
Orientation of map direction.
•
Traffic incidents.
Map view
1. Touch to select the NAV MENU.
2. Touch to select the ROUTE menu.
3. Touch to set a selected destination.
4. Touch to show information for a Point Of Interest
(POI), or for traffic information.
5. Touch to reduce the map size.
6. Drag the indicator along the scale to enlarge or
reduce the map size, or touch the line for the position
required.
7. Touch to change between estimated time to
destination and distance to destination.
8. Touch to enlarge the map size.
9. Touch to select the SETTINGS pop-up menu, select
Navigation, to view the settings.
10. Next manoeuvre icon and the distance to the next
manoeuvre. Touch to hear Voice guidance for the next
manoeuvre.
11. Indicates the vehicle’s position on the set route.
12. The route that has been set.
LRL219560161 NLI.indd 14 28/04/2015 13:50:33
To Next Page
Loading...
