EasyManua.ls Logo

Range Rover L322 - Page 101

Range Rover L322
494 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DESCRIPTION AND OPERATION
4.76 RANGE ROVER
Bi-Xenon System
Power Distribution
Feed from the positive battery terminal (C0192) is supplied to fuse 53, fusible link 3, and
fusible link 4 on an R wire. All are located in the passenger compartment fuse box. Fusible
link 3 (C0589) and fusible link 4 (C0590) provide constant battery feeds to the Light Check
Module (LCM) (C0937 & C2039 respectively) on a pair of R wires. The LCM (C2039) is
earthed on an N wire.
Fuse 53 (C0583) provides a constant battery feed to the ignition switch (C0099 on Td6
vehicles, C0028 on V8 vehicles) on an R wire. When the ignition switch is turned to the
'auxiliary' position, current flows across the switch (C0099 on Td6 vehicles, C0028 on V8
vehicles) to fuse 9 of the passenger compartment fuse box (C0585) on a PB wire. Fuse 9
(C0587) provides an auxiliary ignition feed to the LCM (C2040) on a PY wire.
When the ignition switch is turned to the 'ignition' position, current flows across the switch
(C0099 on Td6 vehicles, C0028 on V8 vehicles) to fuse 4 and fuse 32 of the passenger
compartment fuse box (C0585) on a G wire. Fuse 4 (C0587) provides an ignition feed to the
LCM (C2040) on a GS wire.
Fuse 32 of the passenger compartment fuse box (C0585) provides an ignition feed to LH bi-
xenon headlamp (C0009) on a GR wire. Fuse 32 (C0587) also provides an ignition feed to
the RH bi-xenon headlamp (C0011) on a GR wire.
Light Check Module
The LCM (C2040) is located at the base of the RH 'A' post, and monitors the condition of the
fascia mounted rotary lighting switch (C0041) by providing a feed on an NB wire. The LCM
can determine the position of the switch by sensing if a feed is returned on a Y (side lamps)
or a B (headlamps) wire. The LCM also monitors the condition of the column mounted main/
dipped beam switch (C1832) via a U wire.
Side Lamps
If the LCM detects that side lamps have been selected, it provides a feed to the following:
l To the RH side lamp (C0537) on an SU wire
l To the LH side lamp (C0538) on an SG wire
l To the RH tail lamp (C0125) on an SW wire
l To the LH tail lamp (C0121) on an SP wire
l The rear number plate lamp (C1495) on an SN and an SB wire
l To the RH front side marker lamp (C0916) on an SU wire (NAS vehicles only)
l To the RH rear side marker lamp (C0918) on an SU wire (NAS vehicles only)
l To the LH front side marker lamp (C0917) on an SG wire (NAS vehicles only)
l To the LH rear side marker lamp (C0919) on an SG wire (NAS vehicles only).
All are earthed on N wires.