DESCRIPTION AND OPERATION
RANGE ROVER 4.77
Headlamp Dipped Beam
In addition to the lamps outlined in the side lamps section, the LCM will provide feeds to the
following lamps if it detects that headlamp dipped beam has been selected:
l To the RH headlamp dipped beam bulb (C0011) on a YU wire
l To the LH headlamp dipped beam bulb (C0009) on a WG wire.
Both are earthed on N wires.
Headlamp Main Beam
In addition to the lamps outlined in the side lamps and headlamp dipped beam sections, the
LCM will provide feeds to the following lamps if it detects that headlamp main beam has
been selected:
l To the RH headlamp bi-xenon unit (C0011) on a WU and a WB wire
l To the LH headlamp bi-xenon unit (C0009) on a YG and a WB wire.
Both are earthed on N wires.
Diagnostic Socket
The bi-xenon headlamp system can be interrogated using TestBook or T4 via the diagnostic
socket. The diagnostic socket (C0040) is connected to the RH (C0011) and LH (C0009) bi-
xenon units via a pair of WP wires.