EasyManua.ls Logo

Range Rover L322 - Page 108

Range Rover L322
494 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DESCRIPTION AND OPERATION
RANGE ROVER 4.83
RH Turn
The LCM (C2040) monitors the condition of the column mounted direction indicator switch
(C1832) by providing a feed on an NB wire. If a RH turn is selected, the LCM provides the
following outputs:
l From the LCM (C0937) to the RH front direction indicator lamp (C0002) on a UN wire.
l From the LCM (C2039) to the RH rear direction indicator lamp (C0125) on a UN wire.
l From the LCM (C0937) to the RH rear side repeater lamp (C0012) on a UY wire.
All are earthed on N wires.
LH Turn
The LCM (C2040) monitors the condition of the column mounted direction indicator switch
(C1832) by providing a feed on an NB wire. If a LH turn is selected, the LCM provides the
following outputs:
l From the LCM (C2039) to the LH front direction indicator lamp (C0001) on a UG wire.
l From the LCM (C0937) to the LH rear direction indicator lamp (C0121) on a UG wire.
l From the LCM (C2039) to the LH rear side repeater lamp (C0013) on a UY wire.
All are earthed on N wires.
Hazard Warning Lamps
If an impact severe enough to trigger the airbags is detected, the SRS DCU sends a K bus
message to the instrument pack requesting the hazard warning lamps be initiated. This is
relayed to the LCM (C2040) via the I bus on a WSY wire.